The installation of the 3 Layers 3 Strips Parquet is floating (without glue) with tongue and groove interlocking.
It is quick and easy to mount on any new or existing substrate, as long as it is stable, dry, clean and well leveled.
It is recommended to use a vinyl adhesive for bonding and sealing the joints and a damping or vapor barrier mat (in case of rising damp) between the substrate and the floor.
Furthermore, it is always necessary to provide, by using wedges, a perimeter expansion space between all the walls and the floor of not less than 8-10 mm.
It is mandatory to install expansion joints in rooms with a width or length greater than 8 meters.
Before proceeding with the installation of the wooden elements with the floating technique, take the utmost care to:
keep the packages indoors, in rooms protected from bad weather
isolate the packages from the ground and stack them in such a way as not to undergo deformation
transport the packages of the elements to the environments in which they are to be installed
make sure that the ambient humidity and the temperature of the rooms have reached the appropriate levels, i.e. relative humidity of the air 45%-65% and temperature 16-24 C°
3 Layers 3 Strips Floating Parquet maintenance imposes both ordinary and extraordinary care.
The first cleaning of the Floating Parquet can be performed two days after installation.
For the ordinary care it is advisable to remove the dust with a vacuum cleaner or antistatic cloth and wash the floor with neutral detergent. For a quick cleaning use a damp very wrung out soft rag.
For extraordinary care, suggested every 10-15 years, you must turn to specialized staff, that will sand the floor to remove scratches or scores, or just to revive colour, shininess and look.
ORDINARY MAINTENANCE
provide a doormat at the entrance to the house, kept clean, to remove dust and abrasive particles from the soles of the shoes
clean the soles of the shoes on the mat thoroughly
routinely remove dust with a mop or electrostatic dust-catching cloth or by vacuum cleaner with brushes for parquet
usually wash the floor with a cloth dampened with water and a neutral or specific floor detergent for the type of finish and not foamy or aggressive
never wash with boiling water and / or steam-producing appliances and never use solvents, bleach or ammonia
avoid contact with any foamy product or substances, both chemical and natural, which are abrasive, acidic and corrosive
EXTRAORDINARY MAINTENANCE
After years and years of daily use, the parquet may be worn, damaged with a change in color, both due to exposure to light and the natural phenomenon of wood oxidation.
To revive the flooring and restore the wood to its original state, you can proceed with maintenance of the walking surface by contacting expert and qualified personnel, who respect the general safety standards and who carry out the typical phases of:
replacement of damaged elements
sanding of the walking surface
possible grouting
new painting-finishing cycle
Italiano
English
