3 Layers Floating Parquet is a layered wooden floor in 3 layers, glued together with high-strength adhesives: an upper layer of noble wood with a nominal thickness of 3 mm, an intermediate layer in Birch wood or similar and a counterbalance in coniferous wood.
Each single strip is assembled on a plank of maximum dimensions in width and length.
It is already painted and ready for installation. It is sound-absorbing and heat-insulating.
The planks have a total thickness of 14 mm.
For its ease of installation and the maxi-sized format, 3 Layers Floating Parquet is recommended for flooring any type of environment subject to medium traffic, such as homes, studios, offices and shops.


The installation of the 3 Layers Parquet is floating (without glue) with tongue and groove interlocking.
It is quick and easy to mount on any new or existing substrate, as long as it is stable, dry, clean and well leveled.
It is recommended to use a vinyl adhesive for bonding and sealing the joints and a damping or vapor barrier mat (in case of rising damp) between the substrate and the floor.
Furthermore, it is always necessary to provide, by using wedges, a perimeter expansion space between all the walls and the floor of not less than 8-10 mm.
It is mandatory to install expansion joints in rooms with a width or length greater than 8 meters.
Before proceeding with the installation of the wooden elements with the floating technique, take the utmost care to:

  • keep the packages indoors, in rooms protected from bad weather
  • isolate the packages from the ground and stack them in such a way as not to undergo deformation
  • transport the packages of the elements to the environments in which they are to be installed
  • make sure that the ambient humidity and the temperature of the rooms have reached the appropriate levels, i.e. relative humidity of the air 45%-65% and temperature 16-24 C°
  • Main Wood Species